If you have a website or perhaps an web app, speed is really important. The faster your site works and the swifter your web apps function, the better for everyone. Since a website is just a group of files that connect with one another, the devices that store and work with these data files have a vital role in web site general performance.
Hard drives, or HDDs, have been, right up until recent times, the most trusted systems for storing data. Nonetheless, in recent years solid–state drives, or SSDs, have already been rising in popularity. Look at our comparability chart to check out whether HDDs or SSDs are more appropriate for you.
1. Access Time
A result of a revolutionary new solution to disk drive operation, SSD drives allow for much faster data file access rates. With an SSD, data file accessibility times tend to be lower (as small as 0.1 millisecond).
HDD drives continue to makes use of the same basic file access technique that was initially created in the 1950s. Despite the fact that it was much advanced ever since, it’s slower compared to what SSDs are offering to you. HDD drives’ data access speed varies between 5 and 8 milliseconds.
2. Random I/O Performance
The random I/O performance is important for the general performance of any data file storage device. We’ve run thorough testing and have determined an SSD can manage a minimum of 6000 IO’s per second.
All through the exact same trials, the HDD drives proved to be much slower, with only 400 IO operations managed per second. Although this looks like a good deal, for people with a busy server that hosts many well–known web sites, a sluggish hard disk could lead to slow–loading sites.
SSD drives are lacking virtually any rotating elements, meaning there is significantly less machinery inside them. And the less physically moving components you will find, the fewer the prospect of failing can be.
The normal rate of failure of an SSD drive is 0.5%.
HDD drives implement rotating disks for holding and reading through data – a concept dating back to the 1950s. Along with disks magnetically suspended in the air, spinning at 7200 rpm, the likelihood of anything going wrong are usually increased.
The common rate of failing of HDD drives ranges between 2% and 5%.
4. Energy Conservation
SSD drives are considerably small compared to HDD drives as well as they don’t possess any moving parts at all. As a result they don’t produce so much heat and require significantly less power to function and fewer power for cooling down purposes.
SSDs take in somewhere between 2 and 5 watts.
HDD drives can be known for being noisy; they’re at risk of getting too hot and whenever you have several hard drives within a server, you have to have a further air conditioning device used only for them.
In general, HDDs use up in between 6 and 15 watts.
5. CPU Power
The quicker the file accessibility speed is, the sooner the data file calls can be delt with. As a result the CPU do not need to save allocations expecting the SSD to reply back.
The normal I/O delay for SSD drives is just 1%.
By using an HDD, you’ll have to dedicate additional time anticipating the results of your file call. It means that the CPU will stay idle for further time, waiting around for the HDD to reply.
The average I/O delay for HDD drives is about 7%.
6.Input/Output Request Times
It’s time for a few real–world instances. We ran an entire system backup on a web server using only SSDs for data storage reasons. In that process, the typical service time for an I/O request kept under 20 ms.
Sticking with the same server, however this time loaded with HDDs, the outcome were very different. The normal service time for any I/O query changed in between 400 and 500 ms.
7. Backup Rates
Speaking about back ups and SSDs – we’ve found an amazing development with the data backup rate as we transferred to SSDs. Today, a typical server data backup takes just 6 hours.
Alternatively, on a server with HDD drives, an identical back up takes three or four times as long in order to complete. A complete backup of any HDD–driven server often takes 20 to 24 hours.
Should you wish to instantaneously improve the overall functionality of your sites and never having to adjust any kind of code, an SSD–powered website hosting solution is really a really good alternative. Examine our Linux shared hosting – our services offer really fast SSD drives and are offered at affordable prices.
- Live Demo
- Our Virtual Private Servers come with no installation rates and operate in a reliable network offering 99.9% of uptime. Full root server access privileges guaranteed.
Compare our prices
- Have a look at our price list and choose the most suitable Virtual Private Server for your powerful web sites. It is easy to move up to a more powerful VPS package with only a mouse click.
- Compare our hosting plans
- You’ll be able to make contact with us 24/7/365 by email or by making use of our ultra–fast ticketing system. Our company offers a 1–hour reply time guarantee.